Tft Fl (Model 14.1 Sharp); Removing The Tft Fl (Model 14.1 Sharp) - Toshiba Satellite 1400 Series Maintenance Manual

4.30 TFT FL (Model 14.1 Sharp)

4

4.30 TFT FL (Model 14.1 SHARP)

CAUTION: When you replace the fluorescent lamp, wear finger covers or gloves to
avoid contaminating or damaging the LCD panel. Be careful not to let dust or other
foreign matter into the module.

Removing the TFT FL (Model 14.1 SHARP)

To remove the TFT FL (Model 14.1 SHARP), follow the steps below and refer to figures 4-
85 to 4-89.
1. Turn the LCD module upside down.
2. Remove protective cover-S, protective cover-G, the aluminum tape, tape securing
the wire and tape applied to the back of the LCD module. Be careful not to damage
the TCP or ICs. (Dispose of the protective covers and tape you removed.)
3. Lift up the part of the shield tape that covers the back of the LCD module. Be careful
not to lift up any other part of the tape.
Protective cover-G
Satellite 1400/2400 Series Maintenance Manual (960-364/365)
Pins
Figure 4-85 Removing the covers and tape
4 Replacement Procedures
Aluminum tape
Tape to secure the wire
Shield tape
Tape
Protective cover-S
4-113