Toshiba Satellite 1400 Series Maintenance Manual page 377

4.36 TFT FL (Model 15.0 Toshiba)
9. Remove the FL unit from the PCB-ASSY cell.
10. Remove all double-sided tape from the cell's back surface.
CAUTION: 1. The cell's top surface (TAB side) is secured to the frame with double-
sided tape, so be careful not to subject the TAB to stress when you
remove the cell.
2. Be careful not to lift up the opaque tape on the topside of the cell.
Five latches (on the top side)
Cell securing double-sided tape
Back light unit
Figure 4-141 Removing the top frame and PCB-ASSY cell
Satellite 1400/2400 Series Maintenance Manual (960-364/365)
4 Replacement Procedures
Three latches (on the right side)
LCD frame
PCB assembly cell
4-169