4.22 CPU
4.22 CPU
Removing the CPU
To remove the CPU, follow the steps below and refer to figures 4-49 and 4-53.
CAUTION: When you remove the CPU, wipe the grease off of the bottom of the heat
sink, bottom of the cooling fan and top of the CPU. Apply new grease.
1. Remove two M2.5×6 black screws and two M2.5×16 black screws securing the
metal plate.
2. Remove the metal plate.
Figure 4-49 Removing four screws and the metal plate
Satellite 1400/2400 Maintenance Manual (960-364/365)
M2.5×16 black screws
M2×6 black screws
4 Replacement Procedures
Metal plate
4-75