Toshiba Satellite 1400 Series Maintenance Manual page 424

4 Replacement Procedures
8. Secure the TCP of the source PCB with three screws.
9. Secure the TCP of the gate PCB with two screws.
10. Connect the FPC to the connector on the source PCB.
Screw
Screw
Figure 4-192 Securing the TCPs and connecting the FPC
4-216
Source PCB
Pin*
NG: The FPC does not connect firmly.
Tighten the screws with 0.9 kgf•cm of torque.
* Align the holes on the PCBs with the pins.
Satellite 1400/2400 Series Maintenance Manual (960-364/365)
4.39 TFT FL (Model 15.0 SXGA SHARP)
Make sure the latch secures the connector correctly.
See the notches on both the edge of the FPC, and
see the contour of the connector.
Insert the FPC into the connector firmly. The FPC
must have no inclination. Lock the connector firmly.
NG: The FPC has inclination.
Pin*
FPC
Screw
Screw
Gate PCB
Screw