Removing The Battery Pack; Installing The Battery Pack - Toshiba dynaEdge DE-100 Series User Manual

operating your computer away from an AC power source for an extended
period of time.
This section explains how to remove and install the battery pack, and
begins with the removal process which is detailed through the following
steps.

Removing the battery pack

To remove a discharged battery, do the following:
1.
2.
3.
4.
5.
6.
1. Battery lock

Installing the battery pack

To install a battery pack, do the following:
Do not unlock the battery pack while carrying the computer or the battery
pack might fall out and cause injuries.
1.
User's Manual
Do not remove the battery pack while the computer is in Sleep Mode,
as data is stored in RAM, so if the computer loses power it might be
lost.
In Hibernation Mode, data will be lost if you remove the battery pack or
disconnect the AC adaptor before the save is completed.
Do not unlock the battery pack while carrying the computer or the
battery pack might fall out and cause injuries.
Save your work.
Click Start, and click Shut down. Ensure that the Power button ring
LED indicator is off.
Remove all cables and peripherals that are connected to the
computer.
Turn the computer upside down.
Slide the battery lock into its unlocked ( ) position.
Lift the battery pack up to remove it from the computer.
Figure 4-2 Releasing the battery pack
Insert the battery pack as far as it will go into the computer.
1
2. Battery pack
2
4-8