Removing The Rtc Battery - Toshiba TECRA 9100 Series Maintenance Manual

4 Replacement Procedures

Removing the RTC Battery

To remove the RTC battery, follow the steps below and refer to figure 4-27.
1. Disconnect the RTC battery cable from PJ5 on the I/O board.
2. Lift up the insulator covering the RTC battery.
3. Lift out the RTC battery.
TECRA 9100 Maintenance Manual (960-347)
Figure 4-27 Removing the RTC battery
4.11 RTC Battery
RTC battery
PJ5
4-44