How To Use Each Et; How To Use The Trim - Ko Propo EX-1 Mars Operation Manual

How to Use the Transmitter

How to Use the Trim

When the unit is released, it has been assigned as
Et Lever 1 for Steering Trim, Et Lever 2 for Throttle
Trim. At any rate it is the KO original Center Trim.
Even though the trim is adjusted, left and right
turning angle points will not be changed. Howev-
er, if there is a big difference between left and right
turning angles, use the Sub Trim (p25) to adjust.
ET1 Steering Trim
ET2 Throttle Trim
ET3 Steering Travel
Button 1
Auto Display
When the Et Lever or Button is activated, the LCD display
will automatically show its function, and the current position
or value can be confirmed. It will return to the previous
screen display after approx. 3 seconds. When this screen
appears, the System Mode or Function Mode Lamp will
goes off temporarily.
Balance Adjustment by the Trim Lever
The Et Lever has been assigned as Steering Trim, which can adjust the left and right
turning angles (Steering Balance) of the steering servo seperately.
•Turn the steering wheel fully to
the left, and operate the lever.
The screen will be displayed,
and the left turning angle can
be adjusted.
How to Use each ET Lever
Et is the abbreviation for Electric Trim which can
be set any functions. It can be assigned in the
Set Up screen. When the unit is released, it has
been assigned as Et Lever 1 for Steering Trim,
Et Lever 2 for Throttle Trim, Et Dial 3 for Steer-
ing Travel, Et Lever 4 for Brake.
How to Use Each Button
Button 1 and Button 2 can be used for
ON/OFF operation such as timer func-
tion and ABS function. When the unit
is released, it has been with factory
default setting, and it can be set up on
the Set Up Screen. (p44)
•Turn the steering wheel fully to
the right, and operate the lever.
After the screen will be dis-
played, the right turning angle
can be adjusted.
12
ET4 Brake
Button 2