Ko Propo EX-1 Mars Operation Manual page 21

Adjusting Steering Servo Angle
Allows you to adjust the left and right steering servo angles
at the same time when tuning the steering wheel fully.
After switching the power on, press the Up
key until the steering travel screen is called
up from the Initial Screen.
Adjust the maximum turning angle by
pressing the +/- keys.
The maximum value that you can
adjust by the Et dial is fixed with the
value of this screen. Thr current
value appears by pressing the Se-
lect key.
Advice
Advice
•Be sure to set the Travel Dial position of
the Et dial at a maximum value before
adjusting the linkage.
•Can be assigned to the Custom key and
Et. (Set Up screen P42)
•Can assign to Custom Keys/Et, at above
Level 2
(Steering Travel)
ET3
Warning!
Be sure to check that there is no unneces-
sary forces on the push rod by turning the
wheel fully after adjusting the linkage.
*It may damage the servo, and the model
may run out of control.
21