Ko Propo EX-1 Mars Operation Manual page 76

Apply the "Swing" effect to the throttle operation automatically.
There is a technique used only by a small portion of the ex-
pert drivers which instigates the throttle during the accel-
eration. This is a grip control technique, by using the weight
transfer of the car and this function reappears it.
Use the button to turn it ON/OFF.
It allows you to select either a
push method which activates
only while pressing the button
or a toggle method, pressing the
button for turning ON/OFF.
Can be set to the Custom key for
immediate call up.
Adjusting the "Swing Width" (Acceleration Width)
This function does not appear unless it is assigned to the BTN in the
Set Up screen (P44)
Set the return amount from the operation position.
Can be assigned to the Et.
After switching the power on, press the
Up key until the Acc Width screen is dis-
played.
Use the +/- keys to adjust.
The pilot lamp blinks when this func-
tion is on.
When this function is assigned to the Et, the value can be adjusted as-
suming the value displayed on the screen as a maximum value.
Advice
Advice
•Try a setting from around 30.
Time
Maximum
Operating
Operating
Trigger
Trigger
Neutral
Time
Maximum
Servo
Servo
movement
movement
PosL
POS L 10 POS H 80 the effect shown
Neutral
76
(Throttle Acceleration)
Pull the triger
PosH
Width
If you set this fanction that
Cycle