Ko Propo EX-1 Mars Operation Manual page 37

Optional Function
Set the race time (Alarm)
Input the race time here, and the alarm sounds at the set time.
Use the Select key to change to the Alarm screen
(flashing colon), and then use the +/- keys to reset
the timer from 1-99 minutes.
Set the Pre-alarm. (Pre-alarm)
Set the pre-alarm before the end of the race time. This is
different from the alarm sound.
Use the Select key to change to the pre-alarm
screen (flashing colon),and then use the +/- keys to
set the time from 1~30 seconds.
Reviewing the Lap memory. (Lap Review)
This screen is used to review and erase lap times.
The memory of each lap will be stored from the number of laps dis-
played on the Lap review screen.
Use the Select key to change to the Lap Review
screen, and then use the +/- keys to select each of the
lap times/ If 41 or more laps are stored, the new laps
overwrite the old laps, starting from lap 1. The finishing
time of the race is stored at the next lap after the final
lap record.
Press both the +/- keys simultaneously to reset each lap. Press the
+/- keys and Select key simultaneously to clear all of the laps.
Set the target lap time. (Alarm) (Lap Navigation)
Input your own target lap time. When the timer starts, the alarm will
sounds after the Up Timer starts.
Use the Select key to change to the Lap
Navigation screen, and then use the +/- keys to
set the time.
The alarm will sound at the set time after the Up
Timer start.
The navigation time can be restarted by pressing
the button again.
Advice
Advice
•You can judge by the position of your car whether the time is faster or slower than
your target time. Even if your driving rhythm is disrupted, you can press the button to
re-start the timer.
37