Display And Control Method For Attaching The Xpansion Unit; Name Of Each Parts And Basic Operation - Ko Propo EX-NEXT Instruction Manual

■ Display and Control Method for attaching the Xpansion unit

■ Display and Control Method for attaching the Xpansion unit
●Name of each parts and Basic operation.
Controlling of the setting adjustments is done via the L(<) key, R(>)key, ENTER(ENT) key, and
Operation
BACK key.
ENT Key
L(<)Key
Lowering a value (for L/R cases: raising toward L); Return to a previous menu item.
R(>)Key
value (for L/R cases: raising toward R); Proceed to next menu item.
BACK Key
L(<)Key+R(>)Key Pressing simultaneously : Reset value to factory setting.
MONITOR
STEERING
THROTTLE
FUNCTION
BACK Key L(<) Key
Basic Operation 1: Selecting from a Menu
This explanation uses [Steering] as an example.
Use the R(>) key to move the cursor over [Steering].
Press the ENTER key to change to the Steering Menu screen
MONITOR
STEERING
THROTTLE
FUNCTION
Basic Operation 2: Changing a Setting Value
This explanation uses [TURN 1] on the Steering Speed screen as an example.
Operate the R (>) key to set to [SPEED] (ST SPEED), and then press the ENT key to switch to the setting menu.
Operate the R (>) key for move the cursol to the value (100%) of [TURN1] (ST SPEED turn speed 1). (Figure left)
Press ENTER key to select it for modification.
The cursor starts flashing. Please change the value by operating R(>) and L(<) Key. (Figure right Changed to 50%)
Press ENT key when change value is finished.
: Selecting item to be modified; Confirming a change after a setting change.
: Used to move cursor between m enu choices and to change a setting value.
: Used to move cursor between menu choices and to change a setting value. Raising
: Returning to previous screen; Canceling change.
XT-TMG DR5.8V
MODEL NO.01
STEERING THROTTLE
ENTKey
XT-TMG DR5.8V
MODEL NO.01
STEERING THROTTLE
R(>) Key
14
Command button
Used for firmware upgrading.
Please refer to an update
manual for the details.
Communication Port
Used for firmware upgrading and ICS
communication.
Please refer to an update manual for the
details.