Ko Propo EX-1 Mars Operation Manual page 14

System Level
Due to the continuous development of computer technology, radio control transmitter have al-
so become more sophisticated and multi functioned. The operation of transmitter has become
complicated despite the advanced control of RC cars. We have been making every effort to
achieve a simple operation method by our original man-machine interface with rather compli-
cation functions. However, we understand that the current system is already difficult to mas-
ter in order to obtain the maximum performance from the unit with more new functions and
features. (Much more functions and features but the simple operation) In order to make it pos-
sible, we have developed the selectable number of functions (System level changeable func-
tion). There are four different levels shown as in the table on next page . Please select the lev-
el that you feel most comfortable with.
Changing the System Level
Changing the system level (p18). Can be
step up by own preference but always
start with Level 1 (factory default).
After switching the power on, enter the
System Mode from the Initial screen.
Press the Up key until the System Level
Select screen appears.
Use the +/- keys to select the level.
Caution
When you select a lower level,
please note the followings.
(1) The timer must be stopped. It may not stop
when timer function is still turned on.
(2) The data of the function which has become
unavailable due to level down will still be stor-
ed. Therefore, be careful with trim rate, etc.
(3) Each item of the Set Up screen will be reset.
However, it will be stored to BTN1 for safety
reasons, if the Ch3 is assigned to any button.
(System Level Select)
Advice
Advice
System level can be set for
each model.
14