Ko Propo EX-1 Mars Operation Manual page 25

Adjust a center of the servo horn by using the Sub
Trim, keeping the Et trim neutral.
The trim operated by the Et lever is
a center trim, however; the trim used
on this screen is a normal trim which
moves the whole positions of the
servo horn. Use this function to set
a centered position of the servo
saver horn or move the trim lever to
the middle position.
After switching the power on, press the
Up key until the Trim screen is called
up from the Initial Screen.
Selecting the channel by using the Select
key.
Use the +/- keys to adjust.
Advice
Advice
•Can be set to the Custom keys for immediate call up(P43).
•During the linkage process, make sure to try to set the servo horn as close to neutral
as possible. Then, perform the Sub Trim operation. Do not set the Sub Tim to a large
value. Doing so may cause a 'dead' space in the steering wheel. Try to set the value
within 40.
(Sub Trim)
25