Charging - Ko Propo EX-1 Mars Operation Manual

How to Open the Battery Cover
Press down and slide the battery compartment
cover as shown.
How to Insert Dry Cells (sold separately)
(1) Insert eight AA size batteries into the battery
box.
(2) Insert the battery box matched with battery
box terminals (+)(-) and transmitter terminals.
(3) Close the battery compartment with cover.
Warning!
Do not use AA size Ni-cad battery. It may cause
corrosion inside the transmitter with gas when

charging.

How to Insert a Ni-cad Battery
or Hydropack (sold separately)
(1) Plug in the connector of a Ni-cad battery pack.
(2) Insert a Ni-cad battery or Hydropack correctly.
Close the battery compartment with cover.
(3) Be sure not to catch battery lead in between
compartment and cover.
Charging (Ni-cd pack only)
Connect AC mains charger or DC 12V charger
(KO Propo product).
The charging time from flat condition is 14-16
hrs for Ni-cad and 25-35 hrs for Hydropack.
Warning!
Do not charge when using dry cells. If you charge
dry cells, it could cause damage to the transmit-
ter.
1.2V AA Nicd
charging current less than 1A
10
Facing correct
direction
AC mains Charger
DC 12V rapid Charger
(sold separatly)