Ko Propo EX-1 Mars Operation Manual page 40

Adjusting the speed of the throttle servo
Limits the maximum
turning speed of the ser-
vo in response to quick
(sudden) trigger opera-
tion.
Limit the speed in the
range of throttle speed
position(P41).
The direction of return
or brake operation can-
not be affected.
It has the same effect in
case of using ESC
After switching on the power, press the Up
key until the Throttle Speed screen is called
up from the Initial Screen.
Use the +/- keys to set the value. Less
value means more limit to the speed.
The Function Mode Lamp blinks when
Throttle Speed is on.
When this function is assigned to the Et, the
speed can be adjusted assuming the value
displayed on the screen as a maximum value.
Advice
Advice
•This function can be turned on and off by pressing the button on the Set Up screen
(P44). The pilot lamp will be linked with the button and Et.
Time
Maximum
Operating Operating
Trigger Trigger
Pull
Neutral
Time
Maximum
Servo
Servo
movement
movement
Speed
Neutral
Time
Maximum
Servo
Servo
movement
movement
Neutral
Speed
40
(Throttle Speed)
Return
100
Setting
30
Speed
Setting