Ko Propo EX-1 Mars Operation Manual page 35

Timer Function
This timer function does not
appear on the display if BTN is
not set to TIM 1 on the Set Up
screen (P44).
Caution ! To delete the Timer
screen, use both the Custom key and
the button in the Set Up screen.
Can be set to the Custom key
for immediate call up.
It is possible to select either the
Up Timer or the Lap Timer. The
optional functions used with
each are shown in the following
table. Finally, the set up of op-
tional function will be stored in
each model memory.
Using the Up Timer (Up Timer)
Keeps time from start to stop.
The timer can be started in two ways: by pressing the button or by
moving the trigger.
An alarm indicating the passage of time sounds every minute.
Once the timer starts, it continues to operate even after the display is
switched to another screen.
Assign the TIM 1 to the BTN on the Set Up
Screen. (p44)
After switching the power on, press the
Up key until the Up Timer screen is called
up from the Initial Screen.
Press the button to start and stop.
Press the +/- keys simultaneously
(approx. 1sec) in order to reset the
timer.
(TIM 1)
Optional Functions
UP Timer
Lap Timer
35
Use the Select key to
change the screen.
Lap Review Navigation Alarm/Pre Alarm
not available available available
available not available available
Trigger start
available
available
Button1