Ko Propo EX-1 Mars Operation Manual page 60

Adjusting the Speed of the Throttle Servo in Two Steps.
Limits the maximum turning speed of the throttle servo, which results
in less response to quick (sudden) trigger operation.
Set the point (Throttle Speed Position), and then set the High/Low
speed range from the point seperately.
The direction of return or brake operation cannot be affected.
Time
Maximum
Operating
Operating
Trigger
Trigger
Pulling
Neutral
Time
Maximum
Servo
Servo
movement
movement
Neutral
After switching the power on, press the
Down key until the Throttle Speed
screen is displayed.
Select high (H) or low (L) by the
Select key.
Use the +/- keys to set each value. Less
value means more limit to the speed.
The Function Lamp blinks when this
function is on.
When this function is assigned to the Et, the speed can be adjusted
assuming the value displayed on the screen as a maximum value.
Advice
Advice
•It is effective that a decrease in power is requested when the output feels glitch.
•This function can be turned on and off by pressing the button on the Set Up screen
(P44). It also can be assigned to the Custom key. In addition, the pilot lamp will be
linked with the button.
Returning
Speed
changing
point
Speed
L 20 H 80 Setting
L H
(side) (side)
60
(2 Way Throttle Speed)
Neutral
L
Effect range of
Changing
point
H
Effect range of
Hi Point