Ko Propo EX-1 Mars Operation Manual page 44

Set Up the Timer to the Button (Set Up)
Can be set so that item
can be turned ON/OFF by
the button 1, 2.
Use the Select key to select the BT1~2 on the
Set Up screen.
Use the +/- keys to set each item. The items
assigned to the Et will blink. If you continue
to select, previous items will be set to OFF.
BTN Setting Table
TIM1
TIM2
PRST
THsp
ABS
AccP
AccT
Caution!
•If 3ch has been assigned to the BTN on
Auxiliary Channel screen (P49), it can on-
ly be left in OFF position.
•If you select System Level 1, the set up
function will not be available. Therefore,
each setting will be set to factory default
setting.
Button2
Button1
System Level
2
3
3
2
3
4
4
44
Name
Up, Lap Timer (P35)
Down Timer (P54)
Throttle Pre-set (P56)
Throttle Speed (P40.60.74)
Active Brake System (P62)
Acceleration Push (P76)
Acceleration Toggle (P76)
Caution!
Please use set up the functions after you
fully understand each function.
*Incorrect settings can cause loss of
control.