Et Keys (1-5) And Bt Button; Steering Wheel Adjustment; Wheel Cap Remove; Throttle Trigger Adjustment - Ko Propo EX-1 ASF Instruction Manual

●ET Keys (1-5) and BT Button (1)
Functions may be assigned to the keys/button.
The possible functions which each key/button may be assigned to
are different.
●Steering Wheel Adjustment
Adjust the tension of the steering wheel spring.
[How to Adjust]
Insert a 1.5mm hex wrench referring to the image below.
Rotate clockwise to increase tension and counterclock-
wise to decrease it.
Excessive counterclockwise rotation will result in the wheel being
unable to return to neutral position. In this case, rotate clockwise
until the wheel returns to neutral.
●Wheel Cap Remove
Insert Wheel Cap Remover to the wheel cap spoke.
Pull up Wheel cap remover with Wheel Cap.
●Throttle Trigger Adjustment
Adjust the position and angle of the brake trigger to your
preferences.
[How to Adjust]
Loosen the hex screws on the throttle trigger with a
1.5mm hex wrench.
Freely adjust the brake trigger position.
Tighten the hex screws to secure.
Throttle Trigger
Brake Trigger
The trigger may be loosened due to temperature, strong shocks,
or prolonged use. In this case, cementing the trigger in position is
recommended. If looseness persists, contact KO Propo Customer
Service Department.
Hex Wrench
Hex Screws
Ball Joint
●Throttle Trigger Position Adjustment
The position of the throttle trigger may be adjusted to
match the user's hands.
[How to Adjust]
Loosen two screws on the rear side of the transmitter.
Slide the Throttle Trigger Position Adjuster as desired.
Tighten the loosened screws to secure.
●ICS Port
This port is used for the ICS USB Adapter HS (sold
separately), which enables the transmitter to connect to a
PC. Special software, which can be downloaded from KO
Propo's website, enables the setting and modification of
the transmitter's model memory from a PC. It also enables
numerous model memory settings to be saved onto a PC.
Refer to KO Propo's website for details on how to use this
feature.
( http://www.kopropo.co.jp/sys/ )
Connect to PC
●Headphone Jack
Attach audio plugs from commercially available
headphones, etc. (sold separately) to the transmitter.
This feature helps users hear the transmitter's operation
sounds while in a noisy pit area.
Audio Plug
(Sold Separately)
Even when headphones are plugged in, sounds will still be emitted
by the transmitter itself. The headphone jack is monaural.
7
Screws
Throttle Trigger
Position Adjuster