Adjusting the steering servo turning angle in the left
and right directions independently.
Adjust the steering servo turning angle in the left
and right directions independently when turnig the
wheel fully. The figure on the screen is expressed as
a percentageof the steering travel as 100% setting.
After switching the power on, press the
Up key until the Steering Balance screen
is called up from the Initial Screen.
It also can be displayed in the
order of Direct to Down keys.
(Direct Mode)
When the wheel is turned to the left or the right, the R/L sign appears
on the screen, and the setting can be made for each direction by
pressing the +/- keys.
Advice
Advice
•Can be called up by the Direct Mode
•If the original chassis is assembled properly, this function is not particularly necessary.
You should not rely on the function too much to resolve a tendency to drift left or right
in your car.
(Steering Balance)
22