Ko Propo EX-1 Mars Operation Manual page 82

Notes on Installing the Receiver
Notes on Installing the Receiver
Do not secure the receiver on the chassis or the "mechanical
deck". Vibrations will cause the receiver to misfunction and may
even cause internal damage to the receiver. Either use the
bracket (receiver holder) provided with the kit, or else cushion
the receiver with a sponge like material.
Notes on Antenna Installation
Please follow the instruction as in the illustration below when
you mount the antenna holder to the metal or carbon
chassis.When using on FRP or carbon hollow antenna on a
racing car, etc., do not pass the antenna wire through the pipe,
allow it to trail away loosely outside.
Piano wire
Aluminium holder
Metal, carbon
(OK if FRP or plastic)
Soldered to
lug board
(Gasoline-powered car)
Sponge
Pipe
Aluminium holder
Metal, carbon
(OK if FRP or plastic)
82 82
Bracket
Pipe
Plastic holder
Metal, carbon
Do not secure
antenna wire
to the plate