Ko Propo EX-1 Mars Operation Manual page 84

Description 2
N
Noise
Neutral
Nicad Pack
O
Oversteer
Resulting sharper turning angle than required.
Push Rod
P
Pumping Effect
Preset
Regulator
R
RF Module
Rapid Charger
Receiver (Rx)
Swing
S
Spline
Servo
Servo Saver Horn
Travel
T
Transmitter (Tx)
Trim
Turning Angle (Travel)
Trigger
Understeer
U
V
VR (variable resistance)
W Width
Wheel
Terminology used in radio control mode usage.
Please refer to the Index for the terminology or wording
of this transmitter.
Electrical interference that can cause incorrect signals to the receiver.
The position of the servo when releasing the stick or wheel of the transmitter.
Assembled rechargeable nickel cadmium battery which is
different from a dry battery cells.
The phenomenon that is caused by the model over reacting to the steering input.
The device that stabilizes the input voltage to the necessary level.
a circuit contoroller that produces and emits electric wave.
The charger which charges the nicad battery very quickly.
The instigation of acceleration by the stick operation.
Exact location of the servo horn in to the neutral position.
The part which changes the transmitted signals into the rotation movement.
The shock absorbing device that is installed or in place of servo horn.
The device that adjust the neutral position of the servo.
A piece pulled with a finger to control the speed or brakes.
The phenomenon that is caused by the model under reacting to
the steering input. Resulting in wider turning angle than required.
It means the volume that detects the position of the stick.
A circular frame which turns to allow cars to steer.
84
Type of parts used in linkage.
Intermittent braking action.
The preset adjustment of settings.
The device that receives signals.
Servo turning angle.
The hand set that transmits signals.
Turning angle of the servo horn.
Size from side to side.