Ko Propo EX-1 Mars Operation Manual page 30

Adjusting the LCD Contrast
The LCD contrast changes depend-
ing on the temperature. Adjusting
the contrast so that the display is
easy to see.
After switching the power on, enter the
System
Screen(P18).
Press the Up key until the LCD Con-
trast screen is displayed.
Use the +/- keys to adjust the contrast.
Caution!
Adjusting the contrast to a very light set-
ting at high room temperature may
make characters become invisible at
low outside temperatures . Please note.
Mode from the
30
Initial
Light
Deep