Ko Propo EX-1 Mars Operation Manual page 23

Adjusting forward direction of the throttle servo
turning angle.
Adjusting the throttle servo turning
angle when the trigger is pullled
fully.
This function can be used for set-
ting the maximum speed point of
ESC or high throttle point of en-
gine.
After switching the power on, press the
Up key until the Throttle High Point
screen is called up from the Initial Screen.
Use the +/- keys to adjust the value.
Advice
Advice
•Can be set to the Custom key for
immediate call up.
•In case of an electric-powered car, first
adjust the high poing of the ESC, and
then find adjustment should be made by
this function.
(Throttle High Point)
23
Warning!
Be sure to check that there is no unneces-
sary force on the push rod by pulling yhe
trigger fully after the linkage.
*It may damage the servo, and the model
may run out of control.