How To Use The Key Panel - Ko Propo EX-1 Mars Operation Manual

Rod Antenna
System Mode Lamp
(ABS Monitor)
Function Mode Lamp
(TH Speed Monitor)
LCD
Et Lever 2
Button Switch 2
(Unallocated)
Et Lever 3
Button Switch 2
(Unallocated)
Notes on switching power off!
After the operation of function keys, trim, and Et levers, do not switch off for at least one second,
otherwise the setting data won't be read.
Once the Direct key is pressed, the unit
enters Direct Mode. In addition, pressing
this key twice call up the Initial Screen
from any other screens.
Can scroll the screen down, switching the
function. In Direct Mode, it will become the
Balance Key.
The figure on the display becomes (-) val-
ue. When both keys (+/-) are pressed si-
multaneously, it will reset the value. In Di-
rect Mode, it will become the Custom
Key(Ky-C).
Name of the Parts of the Transmitter

How to Use the Key Panel

Direct Key
Down Key
- (Minus) Key
Custom Keys....
these operation keys become Custom Keys. The function screen can
be called up immediately in the Direct Mode.
If setting these keys in the Set Up function,
9
Et Lever 1
Steering Wheel
Pilot Lamp
(ACC Monitor)
Key Panel
Et Lever 4
(Brake turning angle)
Power Switch
Throttle Trigger
Battery Compartment
Select Key
Calling up the sub menu or select the LCD
display except for figure data. In Direct
Mode, it will become the Model Select
Key.
Up Key
Can scroll the screen up, switching the
function. In Direct Mode, it will become
the Custom Key (Ky-A)
+ (Plus) Key
The figure on the display becomes (+)
value. When both keys (+/-) are pressed
simultaneously, it will reset the value. In
Direct Mode, it will become
the Custom Key (Ky-B).