Ko Propo EX-1 Instruction Manual

3D Extension Unit
Instruction Manual
KONDO KAGAKU CO., LTD.
Parts List : 3D Extension Unit ------------------------------------- x1
Stand Extension -------------------------------------- x1
Wheel Cap Remover ---------------------------------- x1
Introduction
About this manual
Please read the manual carefully before using this product.
K.I.Y. CONCEPT
KO PROPO introduces Kustomize It Yourself
(K.I.Y.) an interchangeable transmitter. The
concept of the new K.I.Y. brings simplicity to
customizing and upgrading within a modular
system. The new transmitter is composed of 3
modular units: Steering, Throttle and Master
units.
Installation
*Example with EX-1
Attach to the master unit
1. Attach the stand extension to the grip unit.
1. Remove the stand bottom part.
EX-1
2. Attach the stand extension to the bottom of stand.
stand extension
www.kopropo.co.jp
stand bottom part
self tapping
screw
self tapping
screw
2. R e m ov e t h e s t e e r i n g u n i t
from the master unit.
steering unit
3. Attach the 3D extension unit
to the master unit.
3D extension unit
Adjust VR (ST)
Turn on the transmitter and do Adjust VR (ST).
Please do not forget to perform this function or
the steering may not operate correctly.
Operating Instructions
The names of the buttons
ET2
BT1
Adjustment of the steering tension
Stronger : Clockwise
Weaker : Counter Clockwise
ET1
ET3
1.5mm allen wrench