Ko Propo EX-1 Mars Operation Manual page 73

Adjusting the changing position of servo speed.
Can set each changing point, both (TURN) and (Retn) separately.
Can be assigned to the Custom key for immediate call up.
Neutral
After switching the power on, press the
Up key until the Steering Speed
Position screen is displayed.
Use the SELECT key to select
"Turn" or "Retn".
If you turn the wheel, an indicator will be
changed from TURN1 to TURN2, allow-
ing you to confirm the position where the
changing point is.
Use the +/- keys to adjust.
Advice
Advice
•When the unit is shipped from the factory, the Retn2 will not be displayed because it is
set at 100.
Neutral
End
73
(Steering Speed Position)
End