Ko Propo EX-1 Mars Operation Manual page 2

Read this manual carefully in order to obtain maximum performance from the
The auxiliary channel of this unit (3ch) can not be used with the included 2ch
It is necessary to purchase an additional adapter (optional).
How to find information in this manual.
What can be done with this transmitter? ..........................................Contents (P3-4)
What do you want to do or know? ...................................................Contents (P3-4)
What does this mean on the LCD? ................................................... Index (P87)
What does this word mean? Where to find it?..................... Index, Terminology (P83-87)
Want to know details of the function. .............................................Contents (P3-4)
How to call up the LCD display? ....................................... LCD screen table
Notes on Application, Exportation and Modification of the Products
1.
This product is only for the control of models.
2.
(a) If the product is exported from Japan, the prior approval of the Ministry of
Radio/Telecommunications by the country of destination is required.
(b) If this product is re-exported from other countries, it may be subject to restrictions on
such re-export and prior approval of government authorities may be required.
3.
KO is not responsible for any use of this product that is not in compliance with applicable law
and disclaims all responsibility for any modification or alteration of the product, including the
incorporation of the product into other products by third parties, that is not in compliance with
applicable law.
Others
It is illegal to reproduce the contents of this manual without permission.
The contents of this manual are subject to changes without notice.
Although every effort has been made to ensure the accuracy of the information contained in
this manual, please contact us if you have any questions or if you find any errors.
We can not assume any responsibility for any damage arising from the use of this product by
the customer.
Notes to KO CPU transmitter users.
(1) The basic operation in the LCD screen is the same. Use the UP/DOWN keys to change
the function screen and call out the Sub Menu by the Select key. Use the +/- keys to
change the figure data. There are two modes:Function and System.
(2) The Direct mode is not independently functioned as before, it will change to the Function
Mode immediately.
Note to EX-1 user about RF Module.
Caution! Although you can install the former EX-1 RF Module, and electric wave will not be
emitted correctly because the high frequency tuning is different.
Read First
Thank you for purchasing the EX-1 Mars.
unit and store it carefully.
receiver (KR297FZ).
2