Initial Screen; Battery Alarm; Memory Error - Ko Propo EX-1 Mars Operation Manual

Initial Screen

This screen is displayed when the power is turned on. Pressing the Select key in regular
sequence will change the display to Operation Timer and System Level.
Model Name
them are registered
Model Number
when the unit is released)
(10 models, 1~0)
Initial Screen
PPM
(modulation method)
How to Return to the Initial Screen
Pressing the Direct key twice makes
any screen displays return to the
initial screen.
Warning Display in the LCD

Battery Alarm

Battery Alarm
If the battery voltage drops to 9.0V or less while the transmitter is in oper-
ation, the alarm will go off and (BATTERY) will be displayed on the LCD
screen. In this case, replace or recharge the battery.
Warning!

Memory Error

Memory Error
[MEMORY ERROR] appears on the LCD screen with alarm if something
wrong happens to the CPU.
Warning!
About the display of each lamp
System Mode Lamp
Function Mode
Lamp
(none of
Power
supply voltage
If the alarm goes off, collect the model immediately.
*The radio signals will become weaker, which could cause loss
of control.
If [MEMORY ERROR]appears, send the transmitter to our re-
pair service department.
*Although it seems to function normally, sudden misoperation
may occur.
Pilot Lamp
Operation
Timer
Displays the length of time that
the transmitter power has been
on. The operation timer screen
can be displayed by pressing
the Select key from the initial
screen. The timer can be reset
by pressing both the + and -
keys simultaneously.
Pilot Lamp
It is lighted on by turning the power switch on. It blinks
when Throttle ACC (P76) is turned on.
System Mode Lamp
It is turnd on when the unit is in the System Mode. It
blinks when ABS (P62) is turned on.
Function Mode Lamp
It is turnd on when the unit is in the Function Mode. It
blinks when Throttle Speed(P40.60.74) is turned on.
13
System Level
display (P14)
Displays current system level.