Ko Propo EX-1 Mars Operation Manual page 41

Adjusting the changing point of the throttle speed.
Specify the range of speed limit.
After switching the power on, press the Up
key until the Throttle Speed Point screen is
called up from the Initial Screen.
Use the Select key to select eigther high
or low point. The speed will be adjusted in
the range from the point to the full throttle
(H) and from the neutral to the point (L).
Use the +/- keys to set the value. OFF
means unlimited speed for the entire
range, and ALL means limited speed for
the entire range.
The speed limit is applied while "Act" is
displayed on the LCD screen.
Advice
Advice
•Can be set to the Custom key for immediate call up.
•Should apply this function for the entire range until you get used to it. (indicate as
"ALL")
Neutral
L50
Effect range of
H50
Effect range of
41
(Throttle Speed Point)
Changing point
can be adjust
Hi Point