Ko Propo EX-1 Mars Operation Manual page 56

When pressing the button, this function is used to set the
preset position at which the throttle is to be fixed.
This function does not appear on the display until the BTN is not set
on the Set Up screen. (P44)
While pressing the button, Set the throttle position to be fixed on this
screen.
Set the Preset Position of the Throttle. (Throttle Preset)
Set the position at which the
throttle is to be fixed while
pressing the button.
Assign the PRST to the BTN 1 or 2 on
the Set Up screen. (P44)
Press the Up key until the Throttle Pre-
set screen is displayed.
Use the +/- keys to set the preset
position.
Advice
Advice
•Can be set to the Custom key for
immediate call up. It can be used for the
engine, full braking and reverse.
Caution!
Do not assign to BTN when you are not
using this function.
*Mis-operation may cause the model to
run out of control.
56
(Throttle Preset)