Ko Propo EX-1 Mars Operation Manual page 74

Adjusting the speed of the throttle servo in 3 steps.
Allows you to adjust in 3
steps in addition to the 2Way
Throttle Speed on Level 3.
Limits the maximum turning
speed of the throttle servo
resulting in less response
even in the event quick (sud-
den) wheel operation.
It does not affect the speed of
return direction of the trigger
or brake operation.
Set the point and then limit
the speed on the range of
low, middle and high sepa-
rately.
After switching the power on, press the
Up key until the Throttle Speed screen
is displayed.
Use the Select key to select high
(H), middle (M) or low (L).
Use the +/- keys to set each value. Less
value means more limit to the speed.
The Function Mode Lamp flashes when
this function is on.
When this function is assigned to the Et,
the speed can be adjusted assuming
the value displayed on the screen as a
maximum value.
Advice
Advice
•This function can be turned on and off by the button on the Set Up screen (P44) and al-
so can be assigned to the Custom key and the Et. In addition, the pilot lamp will be linked
with the button.
•You can confirm in the Throttle Speed Point screen (next page) where the L/M/H posi-
tion in the stick operation range is.
Time
Maximum
Operating Operating
Trigger
Trigger
Pulling
Neutral
Time
Maximum
H speed
Servo
Servo
M speed
movement
movement
L speed
Neutral L 80 M 20 H 80 Setting
74
(3 Way Throttle Speed)
Returning
Speed
changing
point
Speed