Panasonic Firetracker FT128 Operation Manual page 86

After 60 minutes or
NOTE: See chapter "
"Return"
19 regarding priority order.
"Return"
(When required:
Zone in test mode:
"Access", "password")
01 02 03 04
"A"
Test of routing equipment? 0
"A"
(1 = Yes, 0 = No)
Testing of routing equipment is not permitted in the Australian and NZ convention.
Test of routing equipment in progress.
"1", "A"
nn seconds left.
Monthly test is completed!
Perform monthly test
"A"
Notes:
If an alarm point e.g. an MCP is in alarm state when the test mode is terminated, a fire
alarm will be activated.
When "Fire door closing" function is used, the fire door will be closed when the detectors
controlling the door are tested via the test mode.
The Display (LCD)
", page
End test: ACCEPT
ACCEPT
ACCEPT
ACCEPT? H1
86
Operation Manual
FT128 Rev 2.4
Press "A" to end the test
mode.
The LED "Test mode" is
turned OFF.
"nn" starts at 60 and will
count down to 00.
Scroll or press "Return" to
log off.