Table of Contents
Advertisement
Action
"2"
"A"
End test mode zone: 01
"Return"
End zone in test mode
Perform zone test
"Return"
Notes:
If an alarm point (e.g. a manual call point) is in alarm state when the test mode is ended,
there will be a fire alarm activated.
When the "Fire door closing" function is used, the fire door(s) will be closed when the
zone involved is set in test mode.
Text in display
ACCEPT? L
--- List is empty ---
ACCEPT? D2
ACCEPT? H7
122
Operation Manual
FT128 Rev 2.4
Comments
This is a list in which you can
scroll between all the zones
in test mode. Select or type
the zone number and press
"A". When no more zones
are in test mode
--- List is empty ---
will be shown and the LED
"Test mode" (L9) is turned
OFF. Press "Return" to D2.
Press return to H7
Advertisement
Table of Contents
