Table of Contents
Advertisement
3
4
5
6
7
8
9
10
11
12
13
3.5
System Information in the LCD
The display (LCD) of FT128 in normal operation and in quiescent state will show the
following information:
DD-MM-YYYY
User programmable information text.
DD-MM-YYYY = (Date) Day-Month-Year
hh:mm = (Time) hours:minutes
[i] = Will only be shown in case of one or more Technical Warnings in the system.
3.5.1
Fire Alarm Presentation in the LCD
1. Field for the first alarm point or zone in alarm. By scrolling each alarm will be
shown in this field.
2. Field for the most recent (last) zone in alarm.
3. Field for total number of zones in alarm.
4. Field for alarm text. (User definable.)
3.5.2
User Definable System Information
The information on the bottom row can be created via EBLWin, i.e. it is user definable. In
total 40 characters.
17
The AAF function is used in conjunction with an AAM Control (3340) and the new Local Alarm Acknowledgement
LAA module.
Co-incidence alarm
Delayed alarm
Pre-warning
Test mode alarm
17
LAA (AAF) alarm
New Zealand convention only:
"Routing equipment left isolated"
Fault (not acknowledged)
Disablement
Zones in "Test mode"
Interlocking input / output active
System information
* * * FT128 * *
hh:m
20
Operation Manual
FT128 Rev 2.4
[ i ]
Advertisement
Table of Contents
