Table of Contents
Advertisement
23.6
Event Log (H4/U6)
Three event logs (3 x 500 events) are available:
•
Alarm log (alarm events, for example fire alarm, fire alarm reset, and so on)
•
Interlocking log (interlocking events only)
•
General event log (all other type of events)
The most recent event is shown in the top of the list. If there are no events --- List is empty
--- will be shown.
The initials of the person logged on to the system will also be shown for each event when
applicable (i.e. commands). Commands done via EBLWin and the Web-server will also be
shown.
Note: The event logging is disabled as long as menu H4/U6 is open.
Action
Text in display
"Access"
Scroll to menu H4.
Present system status
Disablement
"A"
Scroll to menu U6.
Event log
"A"
Select event log: 0
0=Alarm
When "A" is pressed, an event will be shown in the
"0", "1" or "2"
display, e.g.:
"A"
FIRE ALARM zone 12 address 45
or
FIRE ALARM zone 32
or
FAULT: Output S1
Acknowledge
"Return"
Select event log: 0
0=Alarm
"Return"
Event log
"Return"
Present system status
1=Interlocking
2=General
DD-MM HH:MM XX
DD -MM HH:MM XX
DD -MM HH:MM XX
1=Interlocking
2=General
107
Comments
Log on to FT128 as shown in
page 35.
ACCEPT? H4
ACCEPT? U1
Press "A" to accept.
ACCEPT? U6
Select type of event log.
The most recent event will
be shown, i.e. use "" to
scroll downwards in the list.
xxx:
"Blank" = FT128
Win = By EBLWin
Web = By Web-server
SP = By Service Personnel
Select type or press
"Return" to menu U6.
Scroll or press "Return" to
menu H4
ACCEPT? U6
Scroll or press "Return"
ACCEPT?H4
Operation Manual
FT128 Rev 2.4
Advertisement
Table of Contents
