Table of Contents
Advertisement
28.5
Re-Enable Interlocking Output (H9/C5)
Disabled interlocking outputs are listed in menu H4/U1.
Interlocking outputs (Type = Interlocking) will be re-enabled via this menu but not via menu
H2.
All interlocking outputs, disabled via menu H2/B4, will be re-enabled via menu H2/B8
If there are no outputs to re-enable,
Action
"Access"
Scroll to menu H9.
Interlocking outputs and inputs
Activated interlocking outputs/inputs
"A"
Scroll to menu C5.
Re-enable interlocking output
Re-enable interlocking output
"A"
area 00
"A" or
Re-enable interlocking output
"Return"
Interlocking outputs and inputs
"Return"
--- List is empty ---
Text in display
point 00
138
will be shown.
Log on to FT128 as shown in
page 35.
ACCEPT? H9
ACCEPT? C1
ACCEPT? C5
This is a list in which you can
ACCEPT?
scroll.
Press "A" (for re-enable) or
"Return" (not re-enable) to menu
C5.
Scroll or press "Return" to menu
ACCEPT? C5
H9.
Scroll or press "Return"
ACCEPT? H9
Operation Manual
FT128 Rev 2.4
Comments
Advertisement
Table of Contents
