Acknowledge Faults (H6) - Panasonic Firetracker FT128 Operation Manual

25

Acknowledge FAULTS (H6)

Regarding fault indication, etc., see chapter "Fault", page 61 .
See also chapter "Fault Acknowledge", page 62 .
All fault events are stored in the event log and can be listed. See also chapter "Event Log
(H4/U6)", page 107
In this menu (H6) are up to 200 faults listed:
•
Not corrected (not serviced) and not acknowledged faults (no status info.)
•
Not corrected (not serviced) but acknowledged faults (status: Acknowledged)
•
Corrected (serviced) but not acknowledged faults (status: Serviced)
If there are no faults,
Action
"Access"
Scroll to menu H6.
"A"
"Fault acknowledge"
"Return"
The most recent fault is on top of the list. A serviced fault that is acknowledged will
disappear from this list.
--- List is empty ---
Text in display
FAULT Acknowledge
FAULT: Xxxxxxxx
Date: DD-MM Time: HH:MM Status info.
FAULT: Xxxxxxxx
User defined Alarm text, when applicable
FAULT: Xxxxxxxx
Date: DD-MM Time: HH:MM Acknowledged
FAULT Acknowledge
will be shown.
ACCEPT? H6

ACCEPT? H6
120
Operation Manual
FT128 Rev 2.4
Comments
Log on to FT128 as shown
in page 35.

This is a list in which you
can scroll. The first fault in
the list is the most recent

fault. Status info., see
above.
When applicable, press
"" for more info.
To acknowledge the fault
shown in the display,
press "Fault
acknowledge" (P6).
The status info. is now
Acknowledged. When
this fault is corrected it
will be removed from the
list. Scroll in the list e.g.
to acknowledge more
faults or press "Return" to
menu H6.
Scroll or press "Return" to
log off.