Installing The Rack Location Mat - Agilent Technologies SPS 4 User Manual

3 Installation

Installing the Rack Location Mat

Figure 6
The autosampler has a separate rack location mat which sits on top of the
spill tray and positions the sample racks (or a rack adapter for 96- well
microtiter plates), standards rack and fixed wash reservoir.
To fit the rack location mat:
1 Ensure that the spill tray is correctly fitted onto the autosampler base
2 One end of the rack location mat has a "dovetail" feature as shown in
Figure 7
3 Ensure that the slot for the fixed wash reservoir is located at the rear
36
Dovetail feature
located at left edge
of frame
Rack location mat
bars.
Figures 6 and 7. Orient the rack location mat so the dovetail feature is
on the left hand side.
Rack location mat fitted to the left end frame
of the unit when installing the rack location mat.
Default fixed wash
reservoir position
Agilent SPS 4 Autosampler User's Guide