Rear View - Agilent Technologies SPS 4 User Manual

Rear View

Figure 2
Figure 2
1 Power Switch
2 Power Supply Input
Agilent SPS 4 Autosampler User's Guide
Indicator Codes" on Page 66 for details of the various error codes.
shows the rear view of the Agilent SPS 4.
6
8
Rear View of Agilent SPS 4
The power switch turns on/off the Agilent SPS 4.
I: Power is ON.
O: Power is OFF.
When the Agilent SPS 4 is turned on, the initialization sequence runs to
check the basic functions and set the probe position. If there are no
errors, the power/error indicator turns green.
The output connector from the AC adapter is connected to this socket.
5
Introduction
1
4 3 2
2
7
19