Intended Use - Agilent Technologies SPS 4 User Manual

Intended Use

The Agilent SPS 4 is designed to automate the presentation of liquid
samples, drawn from tubes held in racks loaded on the rack location mat,
to the instrument for analysis. The Agilent SPS 4 is controlled through
software commands sent via a USB interface.
The Agilent SPS 4 should only be used within the stated specifications.
If the equipment is used in a manner not specified by Agilent, the protection provided
C A U T I O N
by the equipment may be impaired.
Agilent SPS 4 Autosampler User's Guide
Introduction 2
21