Notes On Lifting The Autosampler - Agilent Technologies SPS 4 User Manual

Notes on Lifting the Autosampler

When lifting the autosampler:
• Ensure the power is off and the power and USB cables are
• Remove any accessories fitted to the rack location mat such as sample
• Remove the clear side covers (if fitted).
• It is advisable to lift the autosampler with two people positioning their
Figure 18
The autosampler should never be carried by the probe carriage or the wash pump
C A U T I O N
tubing ducting.
Agilent SPS 4 Autosampler User's Guide
disconnected.
racks, standards rack, the fixed wash reservoir and any associated
tubing.
hands through the end frames at either end as shown in
One person to lift
with hands through
left window
Lifting positions for removing the autosampler
One person to lift
with hands through
right window
Installation 3
Figure 18.
51