Agilent Technologies SPS 4 User Manual page 95

Default Rinse Materials
To avoid damaging rinse lines, select materials with appropriate chemical
resistance for your application, particularly if you use a rinse solution
other than deionized water.
For your reference, the standard supplied rinse lines contain the following
materials:
Part
Polyethylene tube 1.5 mm x 0.6 mm
Peri pump tube Solva, 3 bridged grey/grey 12/pk
Barb connector 2.5mm-1.5mm
Tubing, 2.5mm ID
Nipple, PP, 2.5mm ID, FWR
Single port rinse station PP main part
Nipple, PVDF, 5mm ID, FWR
Tubing, PVC, 8mm x 5mm
Agilent SPS 4 Autosampler User's Guide
Appendices
Material
Polyethylene
Polyvinyl chloride (PVC)
Solvaflex (Solva)
Polypropylene (PP)
PVC
PP
PP
Polyvinylidene fluoride
(PVDF)
PVC
A
95