Lubrication; Service; Spare Parts - Agilent Technologies SPS 4 User Manual

5 Maintenance
It is possible to adjust the tension on the pressure plate on a specific
channel (only if the wash pump can be turned on via the instrument
control software) using the following procedure. If necessary, adjust the
tension on the pressure plates following the instructions in
Adjustment"

Lubrication

The autosampler is self lubricating and does not need the user to apply

lubrication.

Service

An authorized Agilent customer support representative must perform all
servicing of the autosampler. For contact information, refer to the Agilent
Technologies website for your local representative's contact details:
www.agilent.com

Spare Parts

For ordering information of the consumable spare parts, see the Agilent
website at www.agilent.com.
Only use Agilent spare parts with your autosampler.
N O T E
Table 6
Description
Standard rack location mat
Spill tray
Tube anchor
Cable ducting
60
on Page 48.
Consumable spare parts
"Pressure Plate
Agilent SPS 4 Autosampler User's Guide