Fitting the Side Covers
1 Fit the exhaust hose connection into the side cover with the hole by
2 Take the side cover with the exhaust hose connection fitted and fit to
3 Fit the other side cover (blank) to the other end of the autosampler
Agilent SPS 4 Autosampler User's Guide
rotating the end with the bayonet fitting clockwise as shown below.
the side of the autosampler that suits connection to an exhaust hose.
The side cover is pushed into the recesses of the end frame from the
inside and slides down to lock in place.
using the same process.
Appendices
A
89