Agilent Technologies SPS 4 User Manual page 33

The unit should be lifted/moved from the positions shown in
One person should be at the front and one person should be at the rear of
the unit. Bend at the knees if lifting from a low position.
Figure 4
Place the unit on a suitable bench and check all of the items you have
received against the packing list. A typical autosampler configuration
could include the following items:
• Spill tray
• Rack location mat
• Sample probe *
• Standards rack *
• Sample racks *
• Wash reservoir kit *
• Communications cable (USB) *
• Power supply cable including an AC adapter (as appropriate for your
• Tubing (including 3- bridge pump tubing) *
*: These items are packed in an accessory kit box.
**: This item is packed in another box.
Agilent SPS 4 Autosampler User's Guide
At least one
person lifting
from rear.
Lifting positions for removing the autosampler from shipping carton
location) **
Note: Remove
these plastic
inserts before
lifting unit.
At least one
person lifting
from front.
Installation 3
Figure 4.
33