Troubleshooting Guide - Agilent Technologies SPS 4 User Manual

6 Troubleshooting

Troubleshooting Guide

The Agilent SPS 4 is equipped with diagnostic tools such as power/error
indicator and initialization sequence on startup to assist in identifying the
problems.
Power/Error
Indicator:
Initialization
Sequence:
To identify your problem:
• If the autosampler appears to have no power and the power/error
• If the power/error indicator is not lit or the LEDs are lit RED, refer to
• If the autosampler fails in the initialization sequence, refer to
• If the initialization sequence is successful but the autosampler has a
• If the initialization sequence is successful but you cannot control the
If these diagnostic tools do not assist you in identifying your problem,
contact an authorized Agilent representative. Refer to the Agilent
Technologies website for your local representative's contact details:
www.agilent.com
64
Provides useful information on the error state of the
autosampler.
Tests that the probe arm functions in all its movement
axes by moving through the standard and sample
positions for the currently loaded mat and rack settings.
indicator is not illuminated, refer to
Page 65.
"Operating State Problems"
the power/error indicator, refer to
"Initialization Problems"
malfunction in the probing operation, refer to
Page 69.
autosampler from the instrument control software, refer to
"Communication Problems"
"Power Supply Problems"
on Page 65. For the error state indicated by
"Error Indicator Codes"
on Page 68.
on Page 70.
Agilent SPS 4 Autosampler User's Guide
on
on Page 66.
"Probing Problems" on