Tools Required; Unpacking Your Autosampler Cover - Agilent Technologies SPS 4 User Manual

The autosampler cover requires approximately 10
It is recommended that these instructions are read through first and then
followed step by step from the beginning.

Tools Required

The tools required are:
• Cotton or rubber gloves are recommended to avoid fingerprints on the

Unpacking your Autosampler Cover

Use gloves to avoid fingerprints on the clear panels.
N O T E
Ensure you open the box from the top. Remove each component in its
individual wrapping and arrange these on a clean flat bench so they can
be recognized from the images in
Do not slide the clear panels across the bench or against each other to avoid
C A U T I O N
scratching.
The autosampler cover kit is supplied as an easy- to- fit kit and consists of
the following components:
Agilent SPS 4 Autosampler User's Guide
cover as a result of assembly.
–
20 minutes to assemble.
Figure 21.
Appendices A
83