One-Key Measurement Of 24 Parameters - Rigol DS2000 Series User Manual

RIGOL
6 To Make Measurements

One-key Measurement of 24 Parameters

Press MENU at the left of the screen to turn on the measurement menu of the 24
parameters and then press the corresponding menu softkey to quickly realize
"One-key" measurement. The measurement result will be displayed at the bottom of
the screen.
The icons of time and voltage parameters in the measurement items and the
measurement results on the screen are always marked in the same color with the
channel (Measure  Source) currently used. But the delay and phase
measurement items are always marked in green. For example,
Parameter Icons:
Measurement Results:
Note: if the measurement result is displayed as "*****", it means that there is no
signal input in the current source or the measurement result is not within the valid
range (too large or too small).
DS2000 User's Guide 6-15