gefran SIEIDrive LIFT AGy -L Instruction Manual page 225

LCD Display
d.253 LCW Fr PLC(8-15) Monitor of the control bits generated by the internal sequencer.
Bit 8 to 15
d.254 LCW FrPLC(16-24) Monitor of the control bits generated by the internal sequencer.
Bit 16 to 24
d.255 LSW (0-7) Monitor of the drive status. Bit 0 to 7
d.300 EncPulses/Sample Number of encoder pulses, recorded in the time interval defined
by parameter I.504.
d.301 Encoder freq Encoder frequency reading (Motor frequency)
d.302 Encoder speed Encoder speed reading (d.000)*(P.600)
d.350 Option 1 state Drive option 1 state (expansion board type programmed)
d.351 Option 2 state Drive option 2 state (expansion board type programmed)
d.353 Sbi state Communication state between SBI and Master
d.354 Sbi baudrate Communication speed between SBI and Master
d.400 PID reference PID reference signal
d.401 PID feedback PID feedback signal
d.402 PID error PID error signal
d.403 PID integr comp PID integral component
d.404 PID output PID output signal
d.450 Mdplc error Status of internal sequencer
d.500 Lift space Space needed to accelerate the car from zero to max speed
and then decelerate back to zero
d.501 Lift accel space Space needed to accelerate the car from zero to max speed
d.502 Lift decel space Space needed to decelerate the car from max speed to zero
d.800 1st alarm-latest Last alarm stored by the drive alarm list
d.801 2nd alarm Second to last alarm
d.802 3rd alarm Third to last alarm
d.803 4th alarm Fourth to last alarm
d.950 Drive rated curr Drive rated current (it depends on the drive size)
d.951 SW version (1/2) Software version - part 1
d.952 SW version (2/2) Software version - part 2
d.957 Drive size Drive size code
d.958 Drive cfg type Drive configuration type
d.999 Display Test Drive display test
AGy -L
PARAMETER
DESCRIPTION
PICK LIST
LCD Selection Description
0 Wait parametrization
1 Wait configuration
2 Data exchange
3 Error
0 12 Mbit / s
1 6 Mbit / s
2 3 Mbit / s
3 1.5 Mbit / s
4 500 Kbit / s
5 187.5 Kbit / s
6 93.75 Kbit / s
7 45.45 Kbit / s
8 19.2 Kbit / s
15 unknown
0 No error
1 Internal sequencer error
See paragraph 9.3
03.01
00.00
0 0.75kW - 230/400/460V
1 1.5kW - 230/400/460V
2 2.2kW - 230/400/460V
3 3kW - 230/400/460V
4 4kW - 230/400/460V
5 5.5kW - 230/400/460V
6 7.5kW - 230/400/460V
7 11kW - 230/400/460V
8 15kW - 230/400/460V
9 22kW - 230/400/460V
10 30kW - 230/400/460V
11 37kW - 230/400/460V
12 45kW - 230/400/460V
13 55kW - 230/400/460V
14 75kW - 230/400/460V
15 90kW - 230/400/460
16 110kW - 230/400/460V
17 132kW - 230/400/460V
18 160kW - 230/400/460V
21 18.5kW - 230/400460
25 200kW - 230/400460
[0]Standard:400 Standard: 400Vac, 50Hz
[1]American:460 American: 460Vac, 60Hz
IPA
69
70
71
1/100 035
Hz 0.01 036
0.01/1 037
038
039
059
060
% 0.1 041
% 0.1 042
% 0.1 043
% 0.1 044
% 0.1 045
62
?
0.01 63
?
0.01 64
?
0.01 65
046
047
048
049
0.1 050
0.01 051
0.01 052
057
061
099
225